pa audio
Professional Audio
system one audioProfessional Audio systems
pa systeem
To menu

D-Vip, Preliminary data:

Low profile

Lightweight

High acoustic output

Designed as 30 degrees floor monitor

Also very suitable as semi-fullranger

Integrated digital amps with switching mode power supply and power stages:

Superior mains efficiency







Concept

Frequency range
Amplifier
Max SPL @ 1m

Size
Weight
Hardware

Active low profile monitor
2x 6" speakers + 1 inch compression driver, 80 degrees horn
80-18.000 Hz
Digital, 300W mid, 60W high processor controlled
>125dB half space
(Calculated and confirmed in real life measurement using a pink noise burst)
HxWxD=22x53x22cm
9,9kg
Recessed standadapter 35mm





Using 4 DIP switches some important settings can be changed.

The DIP1 high cut filter reduces feedback risk on condenser microphones.

DIP2 reduces mid and high for stand-alone applications.

And of course DIP3 and 4 may be used to reduce input sensitivity by 3, 6 or 9 dB.






The D-Vip is a light weight, low profile generic monitor.
The applied 6" drivers and 1" compression driver in a 80 degrees horn provide high output and smooth frequency response.
The incorporated lightweight digital amp with switching mode power supply offers plenty power, with an efficiency of almost 95%.

Perfect for low profile, high performance applications on small sized stages.
Use it as a regular floormonitor of as sidefill using the 30 degrees angle.
Additionally the D-Vip makes a good semi-fullranger on a stand. (standadapter integrated)


To menu