pa audio
Professional Audio
system one audioProfessional Audio systems
pa systeem
To menu


Extremely high acoustic output

Incorporated digital amplifiers

Superior signal processing including Fletcher Munson Compensation

Switching mode power supply and power stages:

Superior mains efficiency

Compact size and low weight


Frequency range

Max SPL @ 1m


Active high output Low-Q reflex sub
21 inch neodymium driver
32-100 Hz
Digital, 1500W processor controlled, including
136dB (single sub), 142dB (two subs) half space.
(Calculated and confirmed in real life measurement using a pink noise burst)
4 large recessed handles. Nylon stacking feet.
100mm castor wheels on backside sub, extra handles

Using the 4-fold DIP switch
some important parameters can easily be altered.

The low pass filter can be switched from normal-mode to infra-mode worden, to attenuate the basss area above 65Hz.

Additionally the limiter can be set 2dB down for extra safety and lifetime in very tough applications.

And of course this sub also has two DIP's to reduce input sensitivity by 3, 6, or 9dB.

The D-Sub22 is a high output subwoofer, designed to be used with our D-Top1.

Our target was: A strong competitor to the D-Sub21 for a better price, very easy to handle; low weight and compact size.
Two D-Sub22 should be able to keep up with our D-Top 1.
These targets are met by using a lighter 21" woofer with higher efficiency, so that -combined with a lighter and more affordable amp- the system would yield vitually the same output:
The low weight was accomplished by using a low weight cabinet construction, a neodymium driver and the latest high power digital amp.

This state of the art switching amplifier provides massive power at about 90% efficiency. This means an energy loss of only 150 watts at 1500 watts mains input. Advantages: No thermal problems, superb mains efficiency. Only 4,5A mains current draw @ max power. (=averaged value playing musical program, short bursts may show conciderably higher values) This means a complete D-sub22/D-Top1 system may be driven to max power on a 25 ampere /230V mains supply.
Newly developed smart processing ensures safe operating conditions for the drivers. Additionally, level dependant Fletcher Munson compensating bass processing is performed to achieve best performance at all sound levels.

D-Sub22: The perfect sub for your Apex system, also in combination with D-Sub1 of D-Sub2.

To menu